Absolute encoders
Single and multi-turn absolute encoders
Absolute encoders always provide the actual position
data at the system power on, despite possible shaft rotations;
therefore there is no need to reset to the zero point after a power
down.
Stout and accurate, Techmer single and multi turn absolute encoders are the ideal solution to releave motions on operating machines in all industrial fields.
The wide choice of mechanical solutions allow to fulfil any application requirement. The different available output signals and voltage supply range make it possible to interface Elap absolute rotary encoders to any counting system or PLC controller. The encoders high resolution values allow to employ them for applications needing a high accuracy degree.
-
Encoder MEM – BUS Profinet
Encoder MEM – BUS Profinet
Multiturn encoders with fieldbus
8192 steps/revolution – 13 bit
65536 revolutions – 16 bit CIP Sync protocol
-
EtherCAT Encoder
EtherCAT Encoder
Multiturn encoders with fieldbus
8192 steps/rev. – 13 bit
65536 rev. – 16 bit
-
TNH Rotary Sensors/Angle Sensors
TNH Rotary Sensors/Angle Sensors
TECHMER HALL ROTARY SENSORS
TNH Series of Angle Sensors
Special features
- Analog outputs: voltage, current
- Easy to implement 3-wire analog versions
- Partial and fully redundant versions are ISO-pulses and ISO 11452 tested for safety and mission critical applications.
- 5 V or 24 V or 5/24 V supply
- No moving sensor parts
- Range: 0° to 30° to 0° to 360° depending on model
- Unlimited mechanical life
- Touchless technology
- Measures through materials
- 12-bit resolution (0.09°)
- Repeatability <0.1°
- See IO-Link information below
- Contact us
We will be pleased to let you have product information and quotes.
